Protecting your car's bonnet is crucial for keeping it free from chips, scratches, and debris damage, especially when you’re tackling rugged Australian roads or logging long highway drives.
One of the first lines of defense is a bonnet protector, designed to shield your car’s bonnet from debris, stones, and insects. Installing a bonnet protector is a must as it helps protect your car.
In this guide, we’ll show you how to quickly and efficiently install an Ausgo bonnet protector. Not only does a bonnet protector offer functional protection, but it also adds a sleek and stylish element to your car's exterior. Let’s get into the step-by-step process to install it with minimal effort.
Tools and Materials Needed
Before you begin, you must ensure you have the following items:
- Ausgo bonnet protector kit (includes the protector and mounting hardware);
- A microfiber cloth;
- Cleaning solution (mild soap and water works well);
- Measuring tape (optional, for precise alignment);
- Your car’s instruction manual (for reference, if needed).
Most Ausgo bonnet protectors come with everything you need for installation, so no additional tools are required.
Step-by-Step Installation Guide
Step 1: Clean the Bonnet Surface
To ensure a secure fit, start by cleaning your car's bonnet thoroughly:
- Wash the bonnet area with a mild cleaning solution to remove dirt, grease, and wax.
- Dry the surface with a microfiber cloth. A clean surface ensures the adhesive mounts stick properly.
Step 2: Align the Bonnet Protector
- Unpack the Ausgo bonnet protector and lay it on the bonnet to determine its proper alignment.
- Check the fit by positioning it in place. Make sure it doesn’t obstruct the hood latch or wiper operation.
- If necessary, use a measuring tape to ensure the protector is centered for a symmetrical look.
Step 3: Attach Mounting Clips or Adhesive Pads
Depending on the specific Ausgo bonnet protector model, you’ll either use adhesive pads or mounting clips.
1. Adhesive Pads
-
- Peel off the backing from the adhesive pads provided.
- Attach the pads to the designated spots on the underside of the bonnet protector.
- Carefully press the protector onto the bonnet, applying firm and even pressure for a secure bond.
2. Mounting Clips:
-
- Attach the clips included in your kit to the pre-drilled holes on the bonnet protector.
- Fasten the clips to the bonnet edges as directed in the instructions.
- Ensure the clips are tightly secured but don’t overtighten them to avoid damaging your bonnet.
Step 4: Double-Check the Fit
After securing the bonnet protector:
- Check for any gaps or loose areas.
- Adjust the alignment if necessary to ensure proper coverage of your bonnet.
Step 5: Test and Finalize
- Gently open and close the bonnet a few times to confirm there’s no interference with its operation.
- Make sure the protector is securely installed and doesn’t rattle during movement.
Maintenance Tips for Your Bonnet Protector
- Regularly clean it with a non-abrasive cleaner to maintain clarity and prevent build-up of dirt.
- Inspect the mounting hardware occasionally to ensure it remains secure.
Get Yours Today at Ausgo
At Ausgo, find a bonnet protector for your make and model 4x4 in our range. Installing an Ausgo bonnet protector is a simple DIY task that can dramatically extend the life of your vehicle’s bonnet. With all the fixings supplied and instructions available if needed, you can improve your vehicle for an affordable price.
Enjoy the perfect blend of protection and style with Ausgo!
Your car deserves nothing but the best—give it the protection it needs in just minutes!
